AAC Conductor Mecury 111mm2 Overview
The stranded All Aluminium Conductors (AAC) are made up of concentric-lay-stranded aluminum wires only.The conductor may be made up of 7, 19, 37, 61 or more wires in 1, 2, 3, 4 or more layers around a central wire. Each successive layer shall have six more wires than the layer immediately beneath. For a gien cross-sectional area, the conductor becomes more flexible as the number of wires is increased (with a corresponding decrease in size of each wire).
Full hard drawn temper wires are used with the wires stranded in each successive layer having an opposite direction of lay, the outermost layer being right-handed.
STANDARD
AAC Conductor Mecury 111mm2 Standard
Standard sizes to AS 1531
Construction
AAC Conductor Mecury 111mm2 Construction:
AAC Conductor Mecury 111mm2 can be used in low and medium voltage overhead lines.It is a concentric-lay-stranded conductor consisting of aluminum 1350-H19 wires. It available in both single-layer and multi-layer constructions.
AAC Conductor Mecury 111mm2 strands 7 aluminums. The individual wire diameter are all same 4.5mm. The overall diameter for AAC Conductor Mecury 111mm2 is 13.5mm. The conductor cross section is 111mm2 . After the cabling, the total linear mass is 304 kg/km. Through the test, the calculated breaking load should be 16.9kN. At the 20℃, calculate D.C. resistance should be 0.258Ω/km.
All Aluminum Conductor AAC Construction