AAC Conductor Venus 674mm2 Overview
The stranded All Aluminium Conductors (AAC) are made up of concentric-lay-stranded aluminum wires only.The conductor may be made up of 7, 19, 37, 61 or more wires in 1, 2, 3, 4 or more layers around a central wire. Each successive layer shall have six more wires than the layer immediately beneath. For a gien cross-sectional area, the conductor becomes more flexible as the number of wires is increased (with a corresponding decrease in size of each wire).
Full hard drawn temper wires are used with the wires stranded in each successive layer having an opposite direction of lay, the outermost layer being right-handed.
STANDARD
AAC Conductor Venus 674mm2 Standard
Standard sizes to AS 1531
Construction
AAC Conductor Venus 674mm2 Construction:
AAC Conductor Venus 674mm2 can be used in low and medium voltage overhead lines.It is a concentric-lay-stranded conductor consisting of aluminum 1350-H19 wires. It available in both single-layer and multi-layer constructions.
AAC Conductor Venus 674mm2 strands 61 aluminums. The individual wire diameter are all same 3.75mm. The overall diameter for AAC Conductor Venus 674mm2 is 33.8mm. The conductor cross section is 674mm2 . After the cabling, the total linear mass is 1860 kg/km. Through the test, the calculated breaking load should be 97.2kN. At the 20℃, calculate D.C. resistance should be 0.0429Ω/km.
All Aluminum Conductor AAC Construction