NMY NYM-J NYM-O Cable Application
Installation cable suitable for household and industrial usage. Laid on or under plaster, in walls or concrete, without special mechanical protection, but not in dry or pre-stressed concrete. Suitable for dry, same as damp or wet environment; for internal or external application (only if the cable is protected against direct sunlight).
NMY NYM-J NYM-O Cable Standard
DIN VDE 0250, VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1, CE Low Voltage Directive 73/23/EEC and 93/68/EEC,
CONSTRUCTION :
NMY NYM-J NYM-O Cable Construction
Conductor : bare copper conductor acc. to IEC 60228 / HD 383 / DIN VDE 0295
class 1 : solid (RE construction)
class 2 : multi wire stranded (RM construction)
Insulation : PVC compound TI1 acc. to DIN VDE 0281 part 1 / HD 21.1 S4
Filler : cores enveloped in non-vulcanized rubber or plastic compound
Sheath : PVC compound TM1 acc. to DIN VDE 0281 part 1 / HD 21.1 S4
Sheath colour : grey (RAL 7035)
TECHNICAL :
NMY NYM-J NYM-O Cable Technical Features
Voltage: Nominal voltage U0 300 V, Nominal voltage U 500 V
Max. conductor temperature: 70 °C
Operating temperature: Flexible: -5°C to +70 °C, Fixed: – 40°C to +70 °C
Minimum bending radius:
1 core: 15 x diameter
3 core and above: 4 x overall diameter
Max short circuit temp: 160 °C
Standards: Flame retardant Acc. EN 50265-2-1